162F spark plugs - Printable Version +- Rotorway Forums (https://rotorwayforums.com) +-- Forum: Rotorway General (https://rotorwayforums.com/forum-1.html) +--- Forum: General Discussion (https://rotorwayforums.com/forum-21.html) +--- Thread: 162F spark plugs (/thread-252.html)

162F spark plugs - Steven Young - 09-27-2026 Wondering what would be the proper heat range and spark plug for the 162F engine? RE: 162F spark plugs - Jared Hartzell - 09-29-2026 Hey Steven, if you don't get a response soon I'll go to my hangar and see what part number spark plugs I've been running later this week. I used to run Bosch but the factory was sending out NGK's before they shut down, if I recall correctly. So, I've been running those and never had an issue with either. I think it'd be nice if someone put together a document of part numbers for hoses, bearings, spark plugs, etc.. Maybe a modified parts catalog (builder prints) with annotations for parts we can get online or parts stores, I'd like to have that hosted on our documents page! RE: 162F spark plugs - Lyle Swallows - 09-29-2026 i have this note on my spark plugs page. i cross referenced the original Bosch plugs i had PN(FR7DCX) with NGK's plugs PN (BCPR6ES-11) i was wanting to do some testing with Pulstars spark plugs PN(IBE1H10) since we have a complete dual ignition system i felt comfortable testing these plugs with a full suit of 4 EGT probes and an AFR wideband sensor installed. i dont recommend and testing in this area unless those supporting monitors are used. RE: 162F spark plugs - Steven Young - 10-01-2026 Thanks for the help. The spark plugs installed are NGK BKR6E by the previous owner. The BCPR6ES-11 appears to be close to the same except the P designation is a projecting insulator type. Do you think they should be changed based on the original design? RE: 162F spark plugs - Lyle Swallows - 10-01-2026 i'll let someone else chime in what NGK plugs they have installed from rotorway in the later years, the NGK pn i shared was just the equivalent of the Bosch ones installed in mine.